Edge AI

Jetson Orin NX vs Orin Nano for YOLO11: Which Module for Your Camera Count, explained simply.

Jetson Orin Nano and Orin NX share the same carrier-board footprint, the same software stack and, in the 8 GB versions, the same number of GPU cores. So which one should run your YOLO11 vision system? The answer depends less on headline TOPS and more on how many cameras you run, whether you need to record or stream video, and how much headroom you need for tracking and other models. This guide compares the modules and gives a simple way to size them.

By Tirth Borda · Co-Founder · Robotics Systems Lead6 min read
NVIDIA Jetson Orin module running YOLO11 detection on multiple camera streams

Core idea

What this blog covers

Teams often pick a module from a spec sheet, then find the system can't keep up once a second camera, a tracker or video recording is added. Others buy the bigger module when the smaller one would have done. Both mistakes come from sizing by TOPS instead of by the real pipeline.

Main discussion

Quick answer: Orin Nano or Orin NX?

Choose Orin Nano 8 GB for one or two cameras with a small YOLO11 model (n or s) at moderate frame rates, no video recording, and a tight budget. Choose Orin NX 16 GB for three or more cameras, larger models, extra models such as tracking or classification alongside detection, or when you need to encode and record or stream video. Orin NX 8 GB sits in between.

Orin Nano 4 GBOrin Nano 8 GBOrin NX 8 GBOrin NX 16 GB
GPU512-core Ampere1024-core Ampere1024-core Ampere1024-core Ampere
CPU6-core Arm Cortex-A78AE6-core Arm Cortex-A78AE6-core Arm Cortex-A78AE8-core Arm Cortex-A78AE
AI performance (original / Super mode)20 / 34 TOPS40 / 67 TOPS70 / 117 TOPS100 / 157 TOPS
DLA acceleratorsNoneNone12
Hardware video encoderNoNoYesYes
Best forSingle camera, small model1-2 cameras2-3 cameras, more headroom3+ cameras, multiple models, recording

Figures are NVIDIA's published module specs; Super mode requires JetPack 6.2 or later. Always check the current datasheet for the exact module you buy.

Why the GPU core count doesn't tell the whole story

Orin Nano 8 GB and Orin NX 8 GB both have a 1024-core GPU, so a single YOLO11 model on a single camera can look similar on both. The differences show up around the model:

- Clock speeds and power budget: Orin NX runs the GPU at higher clocks within a larger power envelope, which is where much of its extra TOPS comes from. - DLA cores: Orin NX has deep learning accelerators that can run a second model, such as a classifier, without taking GPU time. Orin Nano has none. - CPU: Orin NX 16 GB has two more CPU cores for camera capture, tracking, business logic and ROS 2. - Memory: Orin NX 16 GB has twice the memory and more bandwidth, which matters with several camera streams and models loaded at once. - Video encoding: Orin NX has a hardware encoder. On Orin Nano, encoding video for recording or streaming falls on the CPU, which competes with your pipeline.

A vision system is a pipeline, not just a model. The module that wins is the one with headroom across the whole pipeline.

How to size the module for your camera count

Don't size from TOPS. Measure one camera's pipeline on the target hardware, then calculate:

Required throughput = cameras x frames per second needed per camera
Usable capacity     = measured end-to-end FPS on the module x 0.7  (30% headroom)
It fits if          usable capacity >= required throughput
Example: Orin Nano 8 GB, YOLO11s FP16 at 640 x 640, ~30 FPS end-to-end
Usable capacity  = 30 x 0.7 = 21 FPS
2 cameras at 10 FPS = 20 FPS   -> fits
3 cameras at 10 FPS = 30 FPS   -> does not fit: lower resolution, use YOLO11n, INT8, or Orin NX

Two details make a big difference. First, many inspection and robotics tasks don't need 30 FPS per camera; 5-15 FPS is often enough, which multiplies the number of cameras a module can handle. Second, batching frames from several cameras into one inference call is more efficient than running them one at a time, so measured multi-camera capacity is usually higher than one camera's FPS suggests. Measure both ways with your real cameras.

The ~30 FPS figure comes from our YOLO11 on Jetson Orin Nano guide, which also includes the benchmark script to measure your own pipeline.

What eats your headroom

Detection is rarely the only job on the device. Budget for these before choosing:

Extra workloadLoad falls onEffect
Object tracking (e.g. ByteTrack)CPU, some GPUSmall per camera, adds up with many cameras
Second model (classifier, pose, OCR)GPU or DLATakes GPU time from detection on Orin Nano; Orin NX can offload it to DLA
Recording or streaming videoEncoder or CPUHardware encoder on Orin NX; CPU on Orin Nano
Image preprocessing in PythonCPUOften the hidden bottleneck; move it to the GPU
ROS 2, networking, loggingCPUSteady background load

If your plan includes two or more of these, the extra CPU, DLA and encoder on Orin NX usually pay for themselves.

Super mode: free performance on both modules

JetPack 6.2 added Super mode for Orin Nano and Orin NX, which raises GPU, CPU and memory clocks within a higher power budget. It can lift performance substantially on the same hardware. Check two things before relying on it: your carrier board and power supply must support the higher power mode, and your enclosure must remove the extra heat, otherwise the module throttles and you lose the gain. Our guide to thermal analysis for electronics enclosures covers the cooling side.

Same software, easy upgrade path

Orin Nano and Orin NX use the same JetPack software, so YOLO11 models, TensorRT pipelines and DeepStream applications move between them without code changes. You do need to rebuild TensorRT engines on the target module, because engines are specific to the hardware and JetPack version. Many carrier boards accept both modules, which makes a practical strategy possible: prototype on the cheaper Orin Nano, measure, and move to Orin NX only if the numbers say so.

Our recommendation

For a first vision product with one or two cameras, start with Orin Nano 8 GB in Super mode, build the full pipeline, and measure it. Move to Orin NX 16 GB when you need three or more cameras, several models at once, or hardware video encoding. If you're unsure, the sizing method above with measured numbers will settle it in a day.

We design and deploy edge AI vision systems on Jetson for robotics and industrial inspection, from model training to the enclosure. See our edge AI and embedded ML services, read our operational playbook for deploying YOLO on Jetson, or contact us about your camera setup.

Tagged

  • Jetson Orin NX
  • Jetson Orin Nano
  • YOLO11
  • Edge AI
  • TensorRT

Key takeaways

What readers should remember

  • Orin Nano 8 GB is the best value for one or two cameras running a small YOLO11 model in real time.
  • Orin NX adds CPU cores, memory bandwidth, a hardware video encoder and DLA accelerators, which matter as camera count grows.
  • Orin Nano has no hardware video encoder; if you record or stream video, that alone can decide it.
  • Size the module from a measured pipeline: total frames per second divided by the frames each camera needs, with headroom.
  • Both modules support JetPack 6 Super mode, which raises performance on the same hardware.
Tirth Borda — Co-Founder and Robotics Systems Lead at YantriX Technologies

Written by

Tirth Borda

Co-Founder · Robotics Systems Lead

Leads robotics system architecture and technical execution at YantriX, translating product requirements into integrated mechanical, electronics, embedded, perception and autonomy systems. He guides the work from concept definition through system integration and prototype validation.

Frequently asked questions

Answers from the work itself.

Is Jetson Orin NX faster than Orin Nano?

Yes. Orin NX runs at higher clocks with a larger power budget and adds DLA accelerators and, in the 16 GB version, more CPU cores and memory. The 8 GB modules have the same 1024-core GPU, so for a single small model the gap is smaller than the TOPS figures suggest.

How many cameras can a Jetson Orin Nano handle with YOLO11?

It depends on model size, resolution and frame rate. With YOLO11s FP16 at 640×640 running about 30 FPS end-to-end, an Orin Nano 8 GB typically handles two cameras at 10 FPS each with headroom. Lower resolution, YOLO11n or INT8 increase that.

Does Jetson Orin Nano have a hardware video encoder?

No. Orin Nano has hardware video decoding but no hardware encoder, so recording or streaming video uses the CPU. Orin NX has a hardware encoder.

Can I move my YOLO11 application from Orin Nano to Orin NX?

Yes. Both use the same JetPack software stack, so the application runs unchanged. Rebuild the TensorRT engine on the Orin NX, because engines are tied to the specific module and JetPack version.

What is Jetson Super mode?

A higher-power mode added in JetPack 6.2 for Orin Nano and Orin NX that raises clocks and AI performance on the same hardware. It needs a carrier board, power supply and cooling that support the higher power draw.

Related reading

Keep going on embedded & electronics.

Continue exploring

Related services and proof points

Explore our core engineering capabilities and verified hardware case studies related to this technical domain.

Engineering Consultation

Working on a similar engineering problem?

Share your technical specifications, prototype requirements, or CAD models with our engineering team. NDA support is available where required before confidential CAD exchange.